How to make a picture of the thread? All you need to work - it is a beautiful wooden frame for processing the composition and threads - wool, cotton or acrylic in different colors and thickness. Make a spatial composition is simple, and it looks great in any decor.
To create a composition is better to use strings of different colors and shades. If you find the shade, the yarn can be colored with dyes at home. Painting with threads created in different planes, and such an intersection of threads creates a complex spatial pattern. Performance technique is somewhat similar to the technique izonit, but the principle is still different. From you except for the necessary materials required accuracy, patience, and of course fantasy, which will help create a unique work of art.
Stretcher with protrusions on the inner side;
wide wooden frame;
thread;
stapler;
self-colored fabric (it will be the background);
small nails;
hammer.
Frame and the frame can be purchased at Art Salon, a large selection there. When you select a sub-frame, note the tabs. They must pass through the inner perimeter, and not on the outside, as in most models.
Proceedings
The entire perimeter subframe type in carnation. Drive to deep, the cap is required to perform at 1 cm, and try to get caps were the same height. The distance between the nails about 5 mm.
The tip of the wire tie around one of the studs. Pull the thread to the other side and tie a knot around each clove, but on another level of altitude. So to repeat as many times as you need to start taking shape conceived composition. If the thread is finished or needed a different color, need to fix it as the beginning of the work and continue to create a picture.
When work is finished, insert the stretcher into the frame, carefully fasten studs. Of a monochromatic background fabric cut for a picture. Turn the picture of the future wrong side up, attach the fabric and secure it with a stapler. Tension to be uniform, it is better not to pull on the perimeter, and first mounted on opposite sides. This will avoid the appearance of wrinkles.
To make the picture look better, seemed much heavier and not gathering dust, put it under glass. Scheme designs can be found online, there are sites for lovers of izoniti, there are a variety of circuits, from simple to complex. For the first job is better to choose a simple composition and small size, but when mastered all the subtleties of thread painting, you can take on a more complex paintings.
Subject collusion and security of Web users now rises with increasing frequency. This time under the gun for the prosecution a number of popular social networks and blogs, which are suspected of distributing your personal information in order to derive commercial benefits from the collaboration with advertising agencies.
According to the Wall Street Journal, a number of major resources have concluded with partner studios online advertising deal, whereby advertisers are taking the address of user profiles that pass through banners. As a result, partners have access to the name, date of birth, address, occupation and other data ukaznym in the questionnaire.
During the investigation it was found that the conspiracy involved these large Internet-formation, as LiveJournal, Facebook and MySpace. Sale, if you will, of personal data lasted for several months. However, many advertising agencies were quick to assure the user audience, that information collected is not used to achieve some business goals.
It is known that the owners of clicks to personalize banner on going get the site address. In the case of social networks is passed a reference to the profile, following which anyone can explore the personal data for the interested. On such a system, it became known last summer, but the owners of social networks in no hurry to be proactive and change the code. The representative of Facebook said that the gap has closed and the programmers are working on source code to prevent data leakage in the future.
Remember, this is not the first case of distribution of personal information Facebook users over the past six months. Now the owners of the largest social network is the task of raising the level of trust, since the portal's reputation was badly damaged in the light of recent events.
In the village I think everyone (or almost everyone) in the shed, closet or attic there is an old non working appliances such as refrigerators. In this post I will tell you how an old refrigerator to make a great car, so even with the function of the truck, which will be very useful in a rustic way of life.
Unfortunately, for a long time inside the refrigerator housing (so-called cooling chamber) made of quality steel 0,8 mm thick. Created by stamping and welding, hot-coated silicate-titanium mixture is so light and aesthetic box with a useful volume of 160-180 liters became practically eternal.
Using as a "donor" old refrigerator "Donetsk", you can make an enviable strength and corrosion characteristics of a garden wheelbarrow. Itself to modify slightly. Scald-wire wire rod d 8 mm top, specially-loaded perimeter of the box and close the technological opening in the bottom of the sheet metal plate with rivets.
Bearing frame can be made from worn-out bicycle frames. Wheels taken from an old pram or anything of a moped.
Cart is better done in the style of "tipper" - with positive roll-over the body. In the course of many years of merciless exploitation of home-made product has proved itself very worthy. Similarly, the basis of a "small" refrigerator, you can make a wheelbarrow slightly smaller. The main thing to pick up the appropriate wheels.
Well, finally! Now the clock delivery of alcohol was made available to all wishing all! No need to send a drunken friend, or go yourself to a night-light in the midst of fun!
Researchers from Rensselaer Polytechnic Institute have developed a new method for the production of green LEDs with increased light output.
A team of researchers led by physics professor, Christian Wetzel (Christian Wetzel) could improve the technique of etching nanoscale layers at the interface between the sapphire base and a layer of gallium nitride, which gives the green glow of LEDs. The new technique significantly improves the light output of green LEDs, which has long eluded.
"Creating a vibrant cheap green LEDs was much more difficult than thought academia and industry, - says Christian Wetzel. - Every computer screen and the TV generates a color image using red, blue and green colors. We already have a powerful, cheap red and blue LEDs. As soon as we can develop a similar green, it will be possible to move to a new generation of high-performance, energy efficient displays.
Sapphire is a widely used and one of the least expensive materials for the production of LEDs. Hence the opening Wetzel may have good prospects for rapidly growing LED industry.
LED lighting requires a small fraction of electricity needed conventional incandescent lamps. In addition, LEDs are very durable and almost not heated. Color LED light emission depends on the type of semiconductor material. The first LEDs were red, and then appeared orange. Years later came blue LEDs, which are now widely used to backlight screens of mobile phones, laptop computers and other electronic devices. Real breakthrough began with a white LED light, which immediately found application in automotive headlamps, flashlights, lighting chambers of refrigerators, etc. In fact, white light in such devices is usually obtained by coating with yellow phosphorus conventional blue LEDs. It adds "extra" step in the production process and leads to "false" white lights with a noticeable bluish tint.
The key to this white LEDs, according to, Christian Wetzel, lies in creating a bright green LED light - enough to combine with the existing high red and blue LEDs, and you can get any color visible to the human eye, including this white.
The research team from Rensselaer Polytechnic Institute as close as to overcome the gap in the brightness of green LEDs and resolve technological barrier to the development of new cost-effective displays.
To playgrounds and other places your child studies were joyous and fun to take care of his safety. On the walk is important to be alert and attentive to the dogs, insects and snakes when walking in the woods.
InsectsMosquitoes
Their bites cause the skin kids red pimples, hardening combing. The sting can be lubricated with iodine, Zelenko, or special soothing ointment.Faces mites
Their bites are not dangerous, but cause severe itching. Initially treated with vinegar, and then lubricate Zelenkov or iodine, to avoid getting infections.Tongs
These parasites are very small, they dig into the skin in the woods, among the bushes. As soon as possible to get rid of mites. To do this, use vegetable oil - poured into the wound for several minutes and remove with tweezers.
If the removed tick gray and flat - it is necessary to process the wound with iodine or Zelenko, pre-washing with soap and water. During the day, should observe the lymph nodes above the bite. If, however, dragged the parasite was red bunting blood after treatment with the wound must be urgently see a doctor.Wasps, bees
In a single bite of trouble, most likely will not occur. As an aid to impose a cold compress - this will slow the spread of venom, to help reduce pain and swelling. Then treated with iodine or Zelenkov. In such cases, you must have your allergy medications.
If the bite appears severe swelling, a child complains of feeling unwell, perhaps there was an allergic reaction to insect venom. It usually manifests itself in the first few minutes: nausea, labored breathing, izmeyaetsya complexion - pale or red.It is important
If the swollen face, eyelids, mouth - can angioedema - an urgent need to call an ambulance. Contacting the doctor is necessary and in that case, if the attack were the lips or mouth of the child. To reduce inflammation, give a drink of cold water or suck on ice.Dogs
If communication with the four-legged friend was over the bite, you should wash the wound with soap and water, wash off the saliva and the possible germs. Then be treated with antiseptic and stop the bleeding - holding a sterile pad. For large or bleeding wound, seek medical attention.
Within two days after the bite should contact travmopunkt. A doctor can prescribe treatment and prevention of antibiotic. If the dogs attack was homeless, can be assigned to vaccination against rabies.Snakes
Snake venom begins to have effect after a few minutes after the bite. Redness and swelling on the skin blisters appear, it becomes purple. The child has a fever, a headache.
The first thing you must call the doctor put the baby to prevent the spread of venom through the body.
You can remove poison, sucking it out of the wound and spitting. But! The mouth should not be damaged. Then wash the wound with a solution of potassium permanganate and treat iodine or Zelenko, give paracetamol and antihistamine.It is important
Do not burn and does not constrict the bite.
The tip of the wire tie around one of the studs. Pull the thread to the other side and tie a knot around each clove, but on another level of altitude. So to repeat as many times as you need to start taking shape conceived composition. If the thread is finished or needed a different color, need to fix it as the beginning of the work and continue to create a picture.
When work is finished, insert the stretcher into the frame, carefully fasten studs. Of a monochromatic background fabric cut for a picture. Turn the picture of the future wrong side up, attach the fabric and secure it with a stapler. Tension to be uniform, it is better not to pull on the perimeter, and first mounted on opposite sides. This will avoid the appearance of wrinkles.
