Getting rid of rust on the car

How to be the case if there was rust on cars, or we bought the car unnoticed by us with rust.

 In that case, if the rust is touched while only the wings, there is nothing terrible, any car over the years, it happens. Such a machine in the future, more will succumb to failure. We can get rid of the rust for up to 3 years, if done conscientiously.
The first step is a place of rust handle a drill with a special nozzle (steel brush), to "live" metal. From our scrutiny will depend on the time we get rid of the rust. After all the drills and degreasing process rust converter. Recall that the converters are in the majority of acid and we must first protect themselves from the acid.
Everything to do with gloves when in contact with skin wash with running water and soda solution, and if suddenly hit in the eye, then wash them just need water, then definitely see a doctor.
Then place car body rinse with plenty of water, getting rid of the converter, degreased and put putty.
Waiting until all dries out and not through the waterproof skins on wooden bars, and plenty of water, leveled surface. At this stage it is necessary to exercise maximum patience and accuracy, will depend on it, as would later become the treated area look bodywork.
With water, remove all dust from the fillings and dry them. You can paint, and own, but if you're worried about the future appearance of the machine and the chance to implement it in the future, it is safer to turn to professionals.
They will pick up the paint so that it is a native and there will be an opportunity to offer a car more expensive, as no rust. If you were to paint without the help of others, you will need a spray gun, paint, primer and adhesive tape with the paper to frame the space of treatment and did not touch the places that you do not want to paint.
Before painting all must be carefully dried and free of grease, paint advise on a sunny day, a used car in the sun and the paint on the hot metal, or, in extreme cases, a little warm fireplace. Grunt Apply a thin layer two to three times, then dry them all and paint, also plot the two or three thin layers.
That's all work to remove rust completed in the future, do not allow the accumulation of dirt in this place.