Spiral hat with his hands

A hat, you can sew their own hands without any vykroyki.Delo that this hat is sewn in a spiral. It can make even the elastic bands or like me from strips of any fabric, tailored on the bias. The advantage of this model is also the fact that you yourself can create just such a long and rippling fields of cap, which is right for you, your type of person.

So, we need cotton fabric (it took me 1 meter in width fabric 150 cm).

I note that if you want to field your hats are bigger and wider, then keep this in mind when buying fabrics, take a little more.
 
Preparation of tissue oblique Bakey


First we need to cut out fabric on the bias strips 6 cm wide.
Now you need all these stripes combine into one long ribbon.
And, as you can see, the edges of the strips obtained cut corners 45 degrees, so join them as well on the bias, as in the photo.
If someone Bakey oblique connection is a challenge, you can just cut these corners at 90 degrees and joined strips in the usual form, across. However, in this case, the total length of the strip significantly reduced, do not forget to take this into account when buying fabric.
Baste or pin together the individual strips of needles, sew on a typewriter.
We should get a long strip with oblique stitches, as you see in the next photo. Smooths seams connection. Fold the strip in half and press out.
One edge of the strip, we need to slightly rounded, literally the initial 30-40 cm
This is necessary so that the bottom of the cap better lay more flat.
To do so, we must strip ironing gently stretch and Rounded.
Our band - blank ready. It remains to handle the open cut (zig-zagom on the sewing machine, protruding corners of the fabric to cut), and can be taken for the formation of the cap.Formation of the cap
Getting to the bottom. The spiral begin to build community.
Meaning of the work lies in the fact that in the end will be a flat circle. If you are building up another round, you see that your band is bent down and bent, then make a small tucks.
For those who crochet, this procedure is absolutely not present difficulties.


The result is a plug-snail. Centimeters in diameter 17.
Will, however, it is better if you take what may be his panamku or a hat with a flat bottom (not baseball cap) and will from time to time apply to it, comparing. So you can be sure that the cap would be a good fit for you.
Also note that if you sew on the machine is not often, it's better this circle stitch by hand (then you can lay on top of the line and hand-stitch), you get more accurate.
Now transplanted to a sewing machine. We need to make a tube.
That is, now we just continue to sew in a spiral to our band, but without adding anything and without making tucks.
The band will turn up and we get a pipe.
It is advisable to have your sewing machine shot sleeve, so much easier to sew.
The height we need to add in this way for about 9 cm (interrupted by the fitting).
Now we have the cap and you can indulge in the best of design, form the cap. As you know, we are starting to form fields.
For this we again have little tucks expand construction. If You put a lot of tucks, then the field will be more wavy.
The length of the field - also at your discretion. Experiment!
I note only that the ending of the field we need to gradually reduce the strip to nothing. Incidentally, I have (in the last photo) is not very well received. :)
The latter series is obtained exactly folded in half stripe.
Now all you need to carefully press thoroughly. That's all done!
A few tips
You can sew a hat on the same principle, but in a more playful version. Here's how it looks in the photo from the magazine MOD »№ 425.
The difference is that the slice of our bars, we do not handle, but on the contrary, we expose for all to see! We sew a hat raw cut out, and then additionally razlohmachivaem it.
I think that in order to fringe turned wider, to initially cut a strip width of 6 cm, and more, 7-8 cm sew strips together you can zig-zagom to simultaneously and to stop further "sprawl" fringe. You can flash the first zig-zagom entire band, stepped back from the edge of a few centimeters (the length of future fringe), and then sew a hat. So you are guaranteed to get the fringe of the same length.
If you take the denim, then razlohmachivanii fringe will be a different color, and will look even more interesting (note only that with denim because of its thickness is difficult to work).
Knit a hat can even be from end clothing or fabric remnants.