Marriage bed - with his own hands

Make a wide double bed with his hands with roomy drawers for bedding. Foundation bed - three solid box-cells connected directly with each other and with the head of the bed with the spar and two bars - traverse.

The central box divides the space under the bed in two parts under the drawers. Headboard - a simple panel of 1650x330mm, the inner side of the mattress support is attached to the reception - bar and side rails 47x47mm Drawer - rack 13x13mm. Join the headboard, box, spar and traverse, which are the main elements of bed, furniture screws and ties. Rely drawers for furniture casters 30 mm in diameter and move in guides that are mounted on the side walls of boxes and pillow. This design allows for easy extension boxes, even if they are loaded with linens.
To face and facade details such as walls and lid boxes, boom, we take the laminated chipboard 22m, while the inner walls of the boxes and boxes - chipboard 19mm and 16mm. Travers and bars for mattress supports make from pine, and a section 47x27mm 47x47mm respectively, and guides for drawers - 13x13mm section. Boxes collect as follows: the sidewall and longitudinal panels have a sample for bonding and interconnects, as well as pasting interior partitions. Racks and support for the mattress fasten screws, 8 mm to the box. Locking lid boxes with flat dowels, glued to the upper edge. Outer edges of the lids should act on 28mm about visible surfaces baskets. In the central box in the upper edges of the cases in the sample under the boom size 100x22mm. Horizontal bars size 47x47mm which is support for the mattress, attached to the inside walls of the longitudinal and transverse ducts, always at the height of the boxes, as well as to strengthen and to the head. On the corners and the middle set of bars stand - 47x47mm. To install the spar in the supports that attach to the cross-box and to the head, do 100x22mm sampling and drill holes for screws.

Collect the boxes with glue and dowel plug flat. When assembling the bottom of the plywood 10mm insert into the slots that are selected in the side walls. Beyond the edges of a box appears at the height 10mm, width 5mm facade board box.
Guides size 13x13mm attached to the boxes with screws, after installing the rails on the headboard and boxes. Traverse and longitudinal - are elements that determine the rigidity of the assembly. In the head and legs attach to traverse bars molded T-shaped. Bed frame is made under a mattress or two mattresses 190x140sm 190x70sm.
Pre-assemble the bed, customize the details and prepare a face to paint. Grind fine sandpaper, toniruem stained and covered with several layers of lacquer furniture with the drying of each layer.

1. Shaped edges attach lids to make this a milling machine rebating 5x5mm.
   2. At the edges of the covers, wall boxes, crates frezeruem grooves under the flat connecting dowels.
   3. Getting the side of the box with the installation of sidewall. Clay promazyvaem connection and fix the parts to dry completely.
   4. We put in the grooves of facade and interior panel box partitions, contractible clamps until the glue has dried.
   5. Counterbore through holes in cakes under the head screws.
   6. To consolidate the support traverse on the walls inside the boxes, drilling holes for screws, and the fix box with support clamps.
   7. In the side walls of the central box under the spar cutouts do 100x22mm.
   8. With chisels and mallet cases in the sample under the boom in cross-supports the mattress.
   9. Two screws with a diameter 8x50 fasten the latches in the position of the mattress.
  10. Guides boxes attach to the inner walls of boxes and head with a small gap with respect to the guide boxes.
  11. Doing longitudinal slots 10mm wide on the inside box to set the bottom.
  12. Collect box with flat dowels and glue.
  13. Hang a decorative edging tape top and front edges of sidewalls boxes.
  14. Connect boxes together by vertical struts, screwing them.
  15. Advanced fasten boxes furniture stitches or bolts and nuts.
  16. Bruschi 27x27mm (traverse) provides the stiffness of the assembly, connecting the headboard to the central and lateral ducts.
  17. Fasten rails boxes size 13x13mm screws to the inner walls of the box.
  18. Fasten spar at the head and the lateral and central ducts. To glue the lid on the box inserts pins.
This article describes the main points of making a double bed, but if the show imagination, you can upgrade it at its discretion.